Skip to content

1993 Chevrolet Lumina APV tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Chevrolet Lumina APV.

1993 Chevrolet Lumina APV tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Lumina APV Lumina APV

1990 – 1993 2 trims

Lumina APV 3.1

120 hp · V6 205/70 R14 5 fitments
GenerationLumina APV 1990–1993
Power120 hp
EngineV6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R1414x5.5 ET42 5x11535TiresRims
205/70 R15 95S15x6 ET36 5x11535TiresRims
205/70 R1414x6.5 ET34 5x11535TiresRims
195/70 R1515x6 ET36 5x11535TiresRims
205/65 R1515x6 ET36 5x11535TiresRims

Lumina APV 3.8

170 hp · V6 205/70 R15 95S 5 fitments
GenerationLumina APV 1990–1993
Power170 hp
EngineV6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R15 95S15x6 ET36 5x11535TiresRims
205/70 R1414x5.5 ET42 5x11535TiresRims
205/70 R1414x6.5 ET34 5x11535TiresRims
195/70 R1515x6 ET36 5x11535TiresRims
205/65 R1515x6 ET36 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.