2001 Chevrolet MW tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Chevrolet MW.

2001 Chevrolet MW tire sizes

155/65R13 165/60R14

Bolt pattern

4x100

Other years

2000 2001 2002 2003 2006 2007 2008 2009 All 2000–2010

Fitment tables

4 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet MW MW

2000 – 2010 4 trims

MW 1.0i (GF-ME63S)

99 hp · 1.0L K10A I4 165/60 R14 75H 2 fitments

GenerationMW 2000–2010

Power99 hp

Engine1.0L K10A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/60 R14 75H	14x4.5 ET45 ~~4x100~~	–	Tires Rims
155/65 R13	13x4 ET45 ~~4x100~~	–	Tires Rims

MW 1.0i (GF-ME64S)

69 hp · 1.0L K10A I4 165/60 R14 75H 2 fitments

GenerationMW 2000–2010

Power69 hp

Engine1.0L K10A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/60 R14 75H	14x4.5 ET45 ~~4x100~~	–	Tires Rims
155/65 R13	13x4 ET45 ~~4x100~~	–	Tires Rims

MW 1.0i (LA-ME64S)

69 hp · 1.0L K10A I4 165/60 R14 75H 2 fitments

GenerationMW 2000–2010

Power69 hp

Engine1.0L K10A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/60 R14 75H	14x4.5 ET45 ~~4x100~~	–	Tires Rims
155/65 R13	13x4 ET45 ~~4x100~~	–	Tires Rims

MW 1.3i (LA-ME34S)

87 hp · 1.3L M13A I4 155/65 R13 2 fitments

GenerationMW 2000–2010

Power87 hp

Engine1.3L M13A I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13	13x4 ET45 ~~4x100~~	–	Tires Rims
165/60 R14	14x4.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.