Skip to content

1995 Chevrolet Omega tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Chevrolet Omega.

1995 Chevrolet Omega tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Omega A

1992 – 1998 3 trims

Omega 2.0i

128 hp · I4 Ethanol 185/70 R14 88T 1 fitment
GenerationA 1992–1998
Power128 hp
EngineI4 Ethanol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88T14x6 ET39 5x1102.2TiresRims

Omega 2.2i

114 hp · I4 195/65 R15 91H 2 fitments
GenerationA 1992–1998
Power114 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6.5 ET33 5x11032TiresRims
185/70 R14 88T14x6 ET39 5x1102.2TiresRims

Omega 4.1i

166 hp · I6 205/60 R15 91H 2 fitments
GenerationA 1992–1998
Power166 hp
EngineI6, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6.5 ET33 5x11032TiresRims
185/70 R14 88T14x6 ET39 5x1102.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.