Skip to content

2019 Chevrolet Onix Joy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Chevrolet Onix Joy.

2019 Chevrolet Onix Joy tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Onix Joy Onix Joy

2017 – 2019 Latin America market 2 trims

Onix Joy 1.0i

79 hp · 1.0L I4 Flex-Fuel 185/70 R14 88H 5 fitments
GenerationOnix Joy 2017–2019
Power79 hp
Engine1.0L I4 Flex-Fuel
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5 ET47 4x10035TiresRims
185/65 R15 88H15x5.5 ET47 4x10035TiresRims
185/65 R15 88H15x6 ET49 4x10035TiresRims
195/65 R15 91H15x6 ET49 4x10035TiresRims
195/55 R16 87H16x6 ET45 4x10035TiresRims

Onix Joy 1.4i

97 hp · 1.4L I4 Flex-Fuel 185/65 R15 88H 5 fitments
GenerationOnix Joy 2017–2019
Power97 hp
Engine1.4L I4 Flex-Fuel
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x5.5 ET47 4x10035TiresRims
185/65 R15 88H15x6 ET49 4x10035TiresRims
195/65 R15 91H15x6 ET49 4x10035TiresRims
195/55 R16 87H16x6 ET45 4x10035TiresRims
205/55 R16 91H16x6.5 ET45 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.