Skip to content

2026 Chevrolet Onix Plus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Chevrolet Onix Plus.

2026 Chevrolet Onix Plus tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Onix Plus Facelift

2025 – 2027 2 trims

Onix Plus 1.0i (Saloon)

80 hp · 1.0 L I3 Petrol + E85 1.0 L I3 Petrol + E85 185/70 R14 3 fitments
GenerationFacelift 2025–2027
MarketLatin America
Power80 hp
Engine1.0 L I3 Petrol + E85 1.0 L I3 Petrol + E85
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/70 R1414x5.5 ET40 4x10035TiresRims
OE185/65 R1515x6 ET43 4x10035TiresRims
Alt195/55 R1616x6.5 ET44 4x10035TiresRims

Onix Plus 1.0T (Saloon)

114 hp · 1.0 L LIV I3 Petrol 1.0 L LIV I3 185/65 R15 3 fitments
GenerationFacelift 2025–2027
MarketLatin America
Power114 hp
Engine1.0 L LIV I3 Petrol 1.0 L LIV I3, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x6 ET43 4x10035TiresRims
OE195/55 R1616x6.5 ET44 4x10035TiresRims
Alt205/45 R1717x7 ET44 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.