Skip to content

2005 Chevrolet Optra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Chevrolet Optra.

2005 Chevrolet Optra tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Optra J200

2004 – 2010 3 trims

Optra 1.6i

107 hp · 1.6L I4 195/55 R15 84V 1 fitment
GenerationJ200 2004–2010
MarketMiddle East
Power107 hp
Engine1.6L I4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x6 ET46 4x114.330TiresRims

Optra 1.8i

119 hp · 1.8L I4 195/55 R15 84V 1 fitment
GenerationJ200 2004–2010
MarketMiddle East
Power119 hp
Engine1.8L I4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x6 ET46 4x114.330TiresRims

Optra 2.0i

119 hp · I4 195/55 R15 84V 2 fitments
GenerationJ200 2004–2010
MarketCanada
Power119 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x6 ET46 4x114.330TiresRims
185/65 R14 86H14x5.5 ET49 4x114.326TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.