Skip to content

2011 Chevrolet Orlando tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Chevrolet Orlando.

2011 Chevrolet Orlando tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Orlando I

2011 – 2018 3 trims

Orlando 1.8i

139 hp · 1.8L 2H0 I4 215/60 R16 95V 4 fitments
GenerationI 2011–2018
Power139 hp
Engine1.8L 2H0 I4, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 95V16x6.5 ET41 5x11535TiresRims
215/55 R17 94V17x7 ET44 5x11535TiresRims
225/50 R17 94V17x7 ET44 5x11535TiresRims
235/45 ZR18 94W18x8 ET46 5x11535TiresRims

Orlando 2.0 D

129 hp · I4 215/60 R16 95V 4 fitments
GenerationI 2011–2018
Power129 hp
EngineI4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 95V16x6.5 ET41 5x11535TiresRims
215/55 R17 94V17x7 ET44 5x11535TiresRims
225/50 R17 94V17x7 ET44 5x11535TiresRims
235/45 ZR18 94W18x8 ET46 5x11535TiresRims

Orlando 2.0 TD

161 hp · 2.0L Z20D1 I4 215/60 R16 95V 4 fitments
GenerationI 2011–2018
Power161 hp
Engine2.0L Z20D1 I4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 95V 5x11535Tires
215/55 R17 94V17x7 ET44 5x11535TiresRims
225/50 R17 94V17x7 ET44 5x11535TiresRims
235/45 ZR18 94W18x8 ET46 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.