Skip to content

2005 Chevrolet Rezzo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Chevrolet Rezzo.

2005 Chevrolet Rezzo tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Rezzo Rezzo

2004 – 2008 3 trims

Rezzo 1.6i

89 hp · 1.6L A16SMS I4 185/70 R14 88H 2 fitments
GenerationRezzo 2004–2008
Power89 hp
Engine1.6L A16SMS I4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET44 4x114.332TiresRims
195/60 R15 88H15x6 ET44 4x114.329TiresRims

Rezzo 1.6i

106 hp · I4 185/70 R14 88H 2 fitments
GenerationRezzo 2004–2008
Power106 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET44 4x114.332TiresRims
195/60 R15 88H15x6 ET44 4x114.329TiresRims

Rezzo 2.0i

121 hp · I4 185/70 R14 88H 2 fitments
GenerationRezzo 2004–2008
Power121 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88H14x5.5 ET44 4x114.332TiresRims
195/60 R15 88H15x6 ET44 4x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.