Skip to content

2013 Chevrolet S10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Chevrolet S10.

2013 Chevrolet S10 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet S10 III

2012 – 2016 4 trims

S10 2.4 2WD

126 hp · I4 Flex-Fuel 215/70 R16 99S 4 fitments
GenerationIII 2012–2016
Power126 hp
EngineI4 Flex-Fuel
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 99S16x6 ET23 6x139.733TiresRims
215/70 R16 99S16x6.5 ET23 6x139.733TiresRims
265/70 R17 113S17x7 ET33 6x139.733TiresRims
235/50 ZR18 97W18x8 ET28 6x139.732TiresRims

S10 2.4 4WD

126 hp · I4 Flex-Fuel 235/75 R16 106S 3 fitments
GenerationIII 2012–2016
Power126 hp
EngineI4 Flex-Fuel
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R16 106S16x6 ET23 6x139.732TiresRims
235/75 R16 106S16x6.5 ET41 6x139.732TiresRims
265/70 R17 113S17x7 ET33 6x139.732TiresRims

S10 2.8 2WD

178 hp · I4 215/70 R16 99S 4 fitments
GenerationIII 2012–2016
Power178 hp
EngineI4, Diesel
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 99S16x6 ET23 6x139.733TiresRims
215/70 R16 99S16x6.5 ET23 6x139.733TiresRims
265/70 R17 113S17x7 ET33 6x139.733TiresRims
235/50 ZR18 97W18x8 ET28 6x139.732TiresRims

S10 2.8 4WD

178 hp · I4 235/75 R16 106S 3 fitments
GenerationIII 2012–2016
Power178 hp
EngineI4, Diesel
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R16 106S16x6 ET23 6x139.732TiresRims
235/75 R16 106S16x6.5 ET41 6x139.732TiresRims
265/70 R17 113S17x7 ET33 6x139.732TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.