Skip to content

2001 Chevrolet Silverado 1500 HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Chevrolet Silverado 1500 HD.

2001 Chevrolet Silverado 1500 HD tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Silverado 1500 HD Silverado 1500 HD

2001 – 2002 2 trims

Silverado 1500 HD 6.0

300 hp · 6.0L V8 235/75 R16 106S 3 fitments
GenerationSilverado 1500 HD 2001–2002
Power300 hp
Engine6.0L V8, Petrol
Center bore116.6 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R16 106S16x6.5 ET28 8x165.135TiresRims
255/70 R16 109S16x6.5 ET28 8x165.135TiresRims
245/75 R1616x6.5 ET28 8x165.150TiresRims

Silverado 1500 HD 6.0 4WD

300 hp · 6.0L V8 245/75 R16 109S 3 fitments
GenerationSilverado 1500 HD 2001–2002
Power300 hp
Engine6.0L V8, Petrol
Center bore116.6 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R16 109S16x6.5 ET28 8x165.135TiresRims
265/75 R16 114S16x6.5 ET28 8x165.135TiresRims
245/75 R1616x6.5 ET28 8x165.150TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.