Skip to content

2006 Chevrolet Silverado 2500 HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Chevrolet Silverado 2500 HD.

2006 Chevrolet Silverado 2500 HD tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Silverado 2500 HD I (GMT800) Facelift

2003 – 2006 3 trims

Silverado 2500 HD 6.0

300 hp · V8 245/75 R16 120R 1 fitment
GenerationI (GMT800) Facelift 2003–2006
Power300 hp
EngineV8, Petrol
Center bore116.6 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R16 120R16x6.5 ET28 8x165.15.5TiresRims

Silverado 2500 HD 6.6

300 hp · V8 245/75 R16 120R 1 fitment
GenerationI (GMT800) Facelift 2003–2006
Power300 hp
EngineV8, Diesel
Center bore116.6 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R16 120R16x6.5 ET28 8x165.15.5TiresRims

Silverado 2500 HD 8.1

330 hp · V8 245/75 R16 1 fitment
GenerationI (GMT800) Facelift 2003–2006
Power330 hp
EngineV8, Petrol
Center bore116.6 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1616x6.5 ET28 8x165.15.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.