Skip to content

2021 Chevrolet Silverado 2500 HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Chevrolet Silverado 2500 HD.

2021 Chevrolet Silverado 2500 HD tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Silverado 2500 HD IV (T1XX)

2020 – 2023 USA market 2 trims

Silverado 2500 HD 6.6i

401 hp · 6.6L L8T V8 245/75 R17 121R 4 fitments
GenerationIV (T1XX) 2020–2023
Power401 hp
Engine6.6L L8T V8, Petrol
Center bore124.1 mm
PCD8x180
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R17 121R17x7.5 ET44 8x1805.5TiresRims
265/70 R17 121Q17x7.5 ET44 8x1805.5TiresRims
275/70 R18 125Q18x8 ET44 8x1805.5TiresRims
275/65 R20 126Q20x8.5 ET47 8x1805.5TiresRims

Silverado 2500 HD 6.6TD

445 hp · 6.6L L5P V8 245/75 R17 121R 4 fitments
GenerationIV (T1XX) 2020–2023
Power445 hp
Engine6.6L L5P V8, Diesel
Center bore124.1 mm
PCD8x180
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R17 121R17x7.5 ET44 8x1805.5TiresRims
265/70 R17 121Q17x7.5 ET44 8x1805.5TiresRims
275/70 R18 125S18x8 ET44 8x1805.5TiresRims
275/65 R20 126S20x8.5 ET47 8x1805.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.