Skip to content

2020 Chevrolet Silverado 3500 HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Chevrolet Silverado 3500 HD.

2020 Chevrolet Silverado 3500 HD tire sizes

Bolt patterns
8x210
IV (T1XX)
8x180
IV (T1XX)
Fitment tables

4 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Silverado 3500 HD IV (T1XX)

2020 – 2023 USA market 4 trims

Silverado 3500 HD 6.6i DRW

401 hp · 6.6L L8T V8 235/80 R17 1 fitment
GenerationIV (T1XX) 2020–2023
Power401 hp
Engine6.6L L8T V8, Petrol
Center bore154.2 mm
PCD8x210
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/80 R1717x6.5 ET125 8x2104.5TiresRims

Silverado 3500 HD 6.6i SRW

401 hp · 6.6L L8T V8 275/70 R18 125S 2 fitments
GenerationIV (T1XX) 2020–2023
Power401 hp
Engine6.6L L8T V8, Petrol
Center bore124.1 mm
PCD8x180
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/70 R18 125S18x8 ET44 8x180–TiresRims
275/65 R20 126S20x8.5 ET47 8x180–TiresRims

Silverado 3500 HD 6.6TD DRW

445 hp · 6.6L L5P V8 235/80 R17 120R 1 fitment
GenerationIV (T1XX) 2020–2023
Power445 hp
Engine6.6L L5P V8, Diesel
Center bore154.2 mm
PCD8x210
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/80 R17 120R17x6.5 ET125 8x2104.5TiresRims

Silverado 3500 HD 6.6TD SRW

445 hp · 6.6L L5P V8 275/70 R18 125S 2 fitments
GenerationIV (T1XX) 2020–2023
Power445 hp
Engine6.6L L5P V8, Diesel
Center bore124.1 mm
PCD8x180
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/70 R18 125S18x8 ET44 8x180–TiresRims
275/65 R20 126S20x8.5 ET47 8x180–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.