Skip to content

2009 Chevrolet Suburban tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Suburban.

2009 Chevrolet Suburban tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Suburban IX (GMT900)

2007 – 2014 2 trims

Suburban 5.3

320 hp · 5.3L LY5 V8 265/70 R17 4 fitments
GenerationIX (GMT900) 2007–2014
Power320 hp
Engine5.3L LY5 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R1717x7.5 ET31 6x139.7–TiresRims
265/65 R1818x8 ET31 6x139.7–TiresRims
275/55 R2020x8.5 ET31 6x139.7–TiresRims
285/45 R2222x9 ET31 6x139.7–TiresRims

Suburban 6.0

352 hp · 6.0L L76 V8 265/70 R17 4 fitments
GenerationIX (GMT900) 2007–2014
Power352 hp
Engine6.0L L76 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R1717x7.5 ET31 6x139.7–TiresRims
265/65 R1818x8 ET31 6x139.7–TiresRims
275/55 R2020x8.5 ET31 6x139.7–TiresRims
285/45 R2222x9 ET31 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.