Skip to content

2022 Chevrolet Suburban tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Chevrolet Suburban.

2022 Chevrolet Suburban tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Suburban XI (GMT1YC)

2021 – 2024 3 trims

Suburban 3.0TD

277 hp · 3.0L LM2 I6 265/65 R18 114T 5 fitments
GenerationXI (GMT1YC) 2021–2024
Power277 hp
Engine3.0L LM2 I6, Diesel
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R18 114T18x8.5 ET26 6x139.735TiresRims
275/60 R20 115T20x9 ET28 6x139.735TiresRims
275/50 R22 111H22x9 ET28 6x139.739TiresRims
275/55 R20 113V20x9 ET28 6x139.738TiresRims
285/45 R22 110H22x9 ET24 6x139.739TiresRims

Suburban 5.3i

355 hp · 5.3L L84 V8 265/65 R18 114T 5 fitments
GenerationXI (GMT1YC) 2021–2024
Power355 hp
Engine5.3L L84 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R18 114T18x8.5 ET26 6x139.735TiresRims
275/60 R20 115T20x9 ET28 6x139.735TiresRims
275/50 R22 111V22x9 ET28 6x139.738TiresRims
275/55 R20 113H20x9 ET28 6x139.739TiresRims
285/45 R22 110H22x9 ET24 6x139.739TiresRims

Suburban 6.2i

420 hp · 6.2L L87 V8 275/50 R22 111H 5 fitments
GenerationXI (GMT1YC) 2021–2024
Power420 hp
Engine6.2L L87 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/50 R22 111H22x9 ET28 6x139.739TiresRims
265/65 R18 114T18x8.5 ET26 6x139.735TiresRims
275/60 R20 115T20x9 ET28 6x139.735TiresRims
275/55 R20 113V20x9 ET28 6x139.738TiresRims
285/45 R22 110H22x9 ET24 6x139.739TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.