2004 Chevrolet Tracker tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Chevrolet Tracker.

2004 Chevrolet Tracker tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2009 3 trims

127 hp · 2.0L I4 195/75 R15 4 fitments

GenerationII 2001–2009

MarketMexico

Power127 hp

Engine2.0L I4, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/75 R15	15x5.5 ET26 ~~5x139.7~~	–	Tires Rims
205/75 R15 97S	15x5.5 ET26 ~~5x139.7~~	26	Tires Rims
215/70 R15 97S	15x6 6JJ ~~5x139.7~~	26	Tires Rims
215/75 R15 100S	15x6 6JJ ~~5x139.7~~	26	Tires Rims

107 hp · 2.0L I4 235/60 R16 100H 1 fitment

GenerationII 2001–2009

MarketLatin America

Power107 hp

Engine2.0L I4, Diesel

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R16 100H	16x7 ET45 ~~5x139.7~~	26	Tires Rims

165 hp · 2.5L V6 215/70 R15 97S 2 fitments

GenerationII 2001–2009

MarketUSA

Power165 hp

Engine2.5L V6, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15 97S	15x6 ~~5x139.7~~	26	Tires Rims
215/75 R15 100S	15x6 ~~5x139.7~~	26	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.