Skip to content

2000 Chevrolet Trans Sport tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Chevrolet Trans Sport.

2000 Chevrolet Trans Sport tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Trans Sport Trans Sport

1996 – 2005 2 trims

Trans Sport 3.4i

184 hp · V6 205/65 R15 94H 5 fitments
GenerationTrans Sport 1996–2005
Power184 hp
EngineV6, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET52 5x115–TiresRims
205/70 R15 95S15x6 ET53 5x11535TiresRims
205/70 R15 95S15x6 ET42 5x11535TiresRims
215/70 R15 97S15x6 ET42 5x11532TiresRims
225/60 R16 97S16x6.5 ET42 5x11532TiresRims

Trans Sport 3.4i

185 hp · V6 205/65 R15 94H 5 fitments
GenerationTrans Sport 1996–2005
Power185 hp
EngineV6, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET52 5x115–TiresRims
205/70 R15 95S15x6 ET53 5x11535TiresRims
205/70 R15 95S15x6 ET42 5x11535TiresRims
215/70 R15 97S15x6 ET42 5x11532TiresRims
225/60 R16 97S16x6.5 ET42 5x11532TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.