2010 Chevrolet Traverse tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Chevrolet Traverse.

2010 Chevrolet Traverse tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2012 USA market 1 trim

288 hp · 3.6L V6 245/70 R17 108S 3 fitments

GenerationI 2009–2012

Power288 hp

Engine3.6L V6, Petrol

Center bore74.5 mm

PCD6x132

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R17 108S	17x7.5 ET50 ~~6x132~~	35	Tires Rims
255/65 R18 109S	18x7.5 ET50 ~~6x132~~	35	Tires Rims
255/55 R20 107H	20x7.5 ET50 ~~6x132~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.