Skip to content

2016 Chevrolet Trax tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Chevrolet Trax.

2016 Chevrolet Trax tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Trax I (U200)

2013 – 2016 2 trims

Trax 1.4T

138 hp · 1.4L A14NET I4 205/70 R16 96H 5 fitments
GenerationI (U200) 2013–2016
MarketUSA
Power138 hp
Engine1.4L A14NET I4, Petrol
Center bore56.6 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 R16 96H16x6.5 ET38 5x10529TiresRims
215/65 R16 98H16x6.5 ET38 5x10529TiresRims
215/60 R17 96H17x6.5 ET38 5x10529TiresRims
215/60 R17 96H17x7 ET38 5x10529TiresRims
215/55 R18 94H18x7 ET38 5x10532TiresRims

Trax 1.8i

138 hp · I4 195/70 R16 94H 5 fitments
GenerationI (U200) 2013–2016
MarketMexico
Power138 hp
EngineI4, Petrol
Center bore56.6 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R16 94H16x6.5 ET38 5x10529TiresRims
205/70 R16 96H16x6.5 ET38 5x10529TiresRims
215/65 R16 98H16x6.5 ET38 5x10529TiresRims
215/60 R17 96H17x6.5 ET38 5x10529TiresRims
215/55 R18 94H18x7 ET38 5x10532TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.