Skip to content

1996 Chevrolet Vectra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Chevrolet Vectra.

Bolt patterns
4x100
II, I

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Chevrolet Vectra II

1996 – 2005 Latin America market 2 trims

Vectra 2.0

148 hp · I4 195/65 R15 89H 3 fitments
GenerationII 1996–2005
Power148 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 89H15x6 ET49 5x11032TiresRims
205/60 R15 89H15x6 ET49 5x11035TiresRims
205/55 R16 89H16x6 ET44 5x11032TiresRims

Vectra 2.0

148 hp · I4 175/70 R14 84T 8 fitments
GenerationII 1996–2005
Power148 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET49 4x1001.7TiresRims
185/70 R14 88T14x5.5 ET49 4x1001.7TiresRims
175/70 R14 84T14x5.5 ET39 4x1001.7TiresRims
185/70 R14 88T14x5.5 ET39 4x1001.7TiresRims
175/70 R14 84T14x6 ET42 4x1001.7TiresRims
185/70 R14 88T14x6 ET42 4x1001.7TiresRims
195/65 R15 91T15x6 ET49 4x10032TiresRims
205/55 R16 89T16x6 ET44 4x10032TiresRims

Chevrolet Vectra I

1994 – 1996 Latin America market 1 trim

Vectra 2.0

148 hp · I4 175/70 R14 84T 3 fitments
GenerationI 1994–1996
Power148 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET49 4x1001.7TiresRims
195/60 R14 85H14x5.5 ET49 4x1002TiresRims
195/60 R15 88H15x6 ET49 4x1002TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.