Skip to content

2013 Chrysler 300C tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Chrysler 300C.

Bolt pattern
Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Chrysler 300C II (LD)

2011 – 2015 3 trims

300C 3.6i

282 hp · 3.6L V6 215/65 R17 98H 4 fitments
GenerationII (LD) 2011–2015
MarketEurope
Power282 hp
Engine3.6L V6, Petrol
Center bore71.5 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R17 98H17x7.5 ET24 5x11530TiresRims
225/60 R18 99V18x7.5 ET24 5x11533TiresRims
235/55 R19 98V19x7.5 ET24 5x11533TiresRims
245/50 ZR20 98W20x8 ET24 5x11535TiresRims

300C 5.7i

363 hp · V8 225/60 R18 98V 4 fitments
GenerationII (LD) 2011–2015
MarketUSA
Power363 hp
EngineV8, Petrol
Center bore71.5 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R18 98V18x7.5 ET24 5x11533TiresRims
245/45 R20 99V20x8 ET25 5x11533TiresRims
255/40 ZR21 97W21x8.5 ET25 5x11533TiresRims
265/35 ZR22 97W22x9 ET20 5x11536TiresRims

300C 6.4i

464 hp · 6.4L V8 225/60 R18 98V 4 fitments
GenerationII (LD) 2011–2015
MarketUSA
Power464 hp
Engine6.4L V8, Petrol
Center bore71.5 mm
PCD5x115
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R18 98V18x7.5 ET24 5x11533TiresRims
245/45 R20 99V20x8 ET25 5x11533TiresRims
255/40 R21 97W21x8.5 ET25 5x11533TiresRims
265/35 R22 97W22x9 ET20 5x11536TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.