2008 Chrysler Crossfire tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Chrysler Crossfire.

2008 Chrysler Crossfire tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2008 2 trims

215 hp · 3.2 L M112 E32 V6 Petrol 3.2 L M112 E32 V6 225/40 ZR18 / 255/35 ZR19 4 fitments

GenerationZH 2003–2008

MarketUSA

Power215 hp

Engine3.2 L M112 E32 V6 Petrol 3.2 L M112 E32 V6, Petrol

Center bore66.5 mm

PCD5x112

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front225/40 ZR18	18x7.5 ET35 ~~5x112~~	32	Tires Rims
	Rear255/35 ZR19	19x9 ET22 ~~5x112~~	33	Tires Rims
OE	225/40 R18	18x7.5 ET35 ~~5x112~~	33 F / 36 R	Tires Rims
Alt	225/40 R18	18x8 ET35 ~~5x112~~	33 F / 36 R	Tires Rims
Alt	Front235/35 ZR19	19x8 ET35 ~~5x112~~	33	Tires Rims
	Rear275/30 ZR20	20x9.5 ET25 ~~5x112~~	36	Tires Rims

330 hp · M112 C32 V6 Petrol M112 C32 V6 225/40 ZR18 / 255/35 ZR19 4 fitments

GenerationZH 2003–2008

MarketUSA

Power330 hp

EngineM112 C32 V6 Petrol M112 C32 V6, Petrol

Center bore66.5 mm

PCD5x112

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front225/40 ZR18	18x7.5 ET35 ~~5x112~~	32	Tires Rims
	Rear255/35 ZR19	19x9 ET22 ~~5x112~~	33	Tires Rims
OE	225/40 ZR18	18x7.5 ET35 ~~5x112~~	33 F / 36 R	Tires Rims
Alt	225/40 ZR18	18x8 ET35 ~~5x112~~	33 F / 36 R	Tires Rims
Alt	Front245/30 ZR19	19x8.5 ET30 ~~5x112~~	33	Tires Rims
	Rear285/25 ZR20	20x10 ET20 ~~5x112~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.