Skip to content

2012 Chrysler Grand Voyager tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Chrysler Grand Voyager.

2012 Chrysler Grand Voyager tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Chrysler Grand Voyager V (RT)

2008 – 2015 2 trims

Grand Voyager 2.8CRD

161 hp · 2.8L R428 I4 225/65 R16 102H 5 fitments
GenerationV (RT) 2008–2015
Power161 hp
Engine2.8L R428 I4, Diesel
Center bore71.5 mm
PCD5x127
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R16 102H16x6.5 ET40 5x12736TiresRims
225/65 R17 103H17x6.5 ET40 5x12736TiresRims
235/55 R18 100H18x7 ET40 5x12736TiresRims
235/55 R18 99H18x7 ET40 5x12736TiresRims
235/50 R19 99H19x7.5 ET40 5x12736TiresRims

Grand Voyager 3.6i

283 hp · 3.6L V6 225/65 R16 102H 5 fitments
GenerationV (RT) 2008–2015
Power283 hp
Engine3.6L V6, Petrol
Center bore71.5 mm
PCD5x127
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R16 102H16x6.5 ET40 5x12736TiresRims
225/65 R17 103H17x6.5 ET40 5x12736TiresRims
235/55 R18 100V18x7 ET40 5x12736TiresRims
235/50 R19 99V19x7.5 ET40 5x12736TiresRims
245/45 R20 99V20x8 ET38 5x12736TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.