Skip to content

2007 Chrysler Town & Country tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Chrysler Town & Country.

2007 Chrysler Town & Country tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Chrysler Town & Country IV (RG)

2001 – 2007 USA market 2 trims

Town & Country 3.3i

180 hp · 3.3L EGA V6 215/70 R15 101S 4 fitments
GenerationIV (RG) 2001–2007
Power180 hp
Engine3.3L EGA V6, Petrol
Center bore71.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R15 101S15x6.5 ET40 5x114.336TiresRims
215/65 R16 98H16x6.5 ET40 5x114.336TiresRims
215/60 R17 96H17x6.5 ET40 5x114.336TiresRims
225/55 R18 98V18x7 ET40 5x114.336TiresRims

Town & Country 3.8i

215 hp · 3.8L EGH V6 215/65 R16 98H 4 fitments
GenerationIV (RG) 2001–2007
Power215 hp
Engine3.8L EGH V6, Petrol
Center bore71.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98H16x6.5 ET40 5x114.336TiresRims
215/60 R17 96H17x6.5 ET40 5x114.336TiresRims
235/55 R17 99H17x7 ET40 5x114.336TiresRims
235/50 R18 97V18x7 ET40 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.