Skip to content

2015 Citroën C1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Citroën C1.

2015 Citroën C1 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Citroën C1 AB40

2014 – 2023 Europe market 2 trims

C1 1.0VTi

68 hp · 1.0L 1KR-FE (KGB40) I3 165/65 R14 83T 4 fitments
GenerationAB40 2014–2023
Power68 hp
Engine1.0L 1KR-FE (KGB40) I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 83T14x4.5 ET35 4x10032TiresRims
165/60 R15 81H15x4.5 ET35 4x10032TiresRims
175/55 R15 77H15x5 ET35 4x10032TiresRims
185/55 R15 82H15x5.5 ET35 4x10032TiresRims

C1 1.2VTi

80 hp · 1.2L EB2 (PAB40) I3 165/65 R14 83T 4 fitments
GenerationAB40 2014–2023
Power80 hp
Engine1.2L EB2 (PAB40) I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 83T14x4.5 ET35 4x10032TiresRims
165/60 R15 81H15x5 ET35 4x10032TiresRims
175/55 R15 77H15x5 ET35 4x10032TiresRims
185/55 R15 82H15x5.5 ET35 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.