Skip to content

2012 Citroën C2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Citroën C2.

Fitment tables

2 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Citroën C2 AJ

2006 – 2012 Southeast Asia market 2 trims

C2 1.4i

74 hp · 1.4L TU3 I4 175/65 R14 82T 5 fitments
GenerationAJ 2006–2012
Power74 hp
Engine1.4L TU3 I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET34 4x10832TiresRims
185/65 R14 86T14x5.5 ET34 4x10832TiresRims
185/60 R15 84H15x5.5 ET30 4x10833TiresRims
195/55 R15 85H15x6 ET27 4x10835TiresRims
195/50 R16 84H16x6 ET27 4x10835TiresRims

C2 1.6i

103 hp · 1.6L TU5 I4 195/55 R15 85H 5 fitments
GenerationAJ 2006–2012
Power103 hp
Engine1.6L TU5 I4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 85H15x6 ET27 4x10835TiresRims
205/45 R16 83V16x6.5 ET28 4x10835TiresRims
185/60 R15 84H15x6 ET27 4x10833TiresRims
195/50 R16 84H16x6 ET27 4x10835TiresRims
205/40 R17 80V17x7 ET28 4x10835TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.