Skip to content

2022 Citroën C4 Cactus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Citroën C4 Cactus.

2022 Citroën C4 Cactus tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Citroën C4 Cactus I Facelift

2018 – 2027 2 trims

C4 Cactus 1.6THP

170 hp · 1.6L I4 Flex-Fuel 205/55 R17 91V 4 fitments
GenerationI Facelift 2018–2027
Power170 hp
Engine1.6L I4 Flex-Fuel
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R17 91V17x6.5 ET20 4x108–TiresRims
195/65 R15 91T15x6.5 ET20 4x108–TiresRims
205/60 R16 92V16x6.5 ET20 4x108–TiresRims
215/45 R18 93V18x7 ET20 4x108–TiresRims

C4 Cactus 1.6VTi

117 hp · 1.6L I4 Flex-Fuel 205/60 R16 92V 4 fitments
GenerationI Facelift 2018–2027
Power117 hp
Engine1.6L I4 Flex-Fuel
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92V16x6.5 ET20 4x108–TiresRims
205/55 R17 91V17x6.5 ET20 4x108–TiresRims
195/65 R15 91T15x6.5 ET20 4x108–TiresRims
215/45 R18 93V18x7 ET20 4x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.