Skip to content

2014 Citroën C4L tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Citroën C4L.

2014 Citroën C4L tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Citroën C4L C4L

2013 – 2015 China market 2 trims

C4L 1.6 PureTech

161 hp · I4 215/55 R16 95H 6 fitments
GenerationC4L 2013–2015
Power161 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R16 95H16x6.5 ET32 4x10833TiresRims
195/65 R15 91H15x6.5 ET27 4x10832TiresRims
205/55 R16 91V16x7 ET29 4x10833TiresRims
215/55 R16 95V16x7 ET29 4x10833TiresRims
215/50 R17 94V17x7.5 ET29 4x10835TiresRims
225/40 ZR18 92W18x7.5 ET30 4x10838TiresRims

C4L 1.8i

137 hp · I4 215/55 R16 95H 6 fitments
GenerationC4L 2013–2015
Power137 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R16 95H16x6.5 ET32 4x10833TiresRims
195/65 R15 91H15x6.5 ET27 4x10832TiresRims
205/55 R16 91V16x7 ET29 4x10833TiresRims
215/55 R16 95V16x7 ET29 4x10833TiresRims
215/50 R17 94V17x7.5 ET29 4x10835TiresRims
225/40 ZR18 92W18x7.5 ET30 4x10838TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.