Skip to content

2017 Citroën C6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Citroën C6.

2017 Citroën C6 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear.

Citroën C6 II

2016 – 2023 China market 2 trims

C6 1.6T

165 hp · 1.6L I4 225/55 R17 97V 5 fitments
GenerationII 2016–2023
Power165 hp
Engine1.6L I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x7 ET48 5x10833TiresRims
245/45 R18 96W18x8 ET53 5x10835TiresRims
255/45 R18 101W18x8.5 ET28 5x10835TiresRims
245/40 R19 98W19x8 ET33 5x10836TiresRims
255/40 R19 99W19x8.5 ET28 5x10836TiresRims

C6 1.8T

201 hp · 1.8L I4 225/55 R17 97V 5 fitments
GenerationII 2016–2023
Power201 hp
Engine1.8L I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x7 ET48 5x10833TiresRims
245/45 R18 96W18x8 ET53 5x10835TiresRims
255/45 R18 101W18x8.5 ET28 5x10835TiresRims
245/40 R19 98W19x8 ET33 5x10836TiresRims
255/40 R19 99W19x8.5 ET28 5x10836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.