Skip to content

1999 Citroën Fukang tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Citroën Fukang.

Fitment tables

2 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Citroën Fukang Fukang

1994 – 2009 China market 2 trims

Fukang 1.4i

74 hp · I4 165/70 R13 79T 5 fitments
GenerationFukang 1994–2009
Power74 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 79T13x5 ET28 4x10832TiresRims
175/65 R14 82T14x5.5 ET24 4x10832TiresRims
175/60 R14 82T14x5.5 ET24 4x10833TiresRims
175/55 R15 81H15x5.5 ET25 4x10835TiresRims
185/55 R15 81H15x6 ET20 4x10835TiresRims

Fukang 1.6i

89 hp · I4 175/65 R13 82T 5 fitments
GenerationFukang 1994–2009
Power89 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R13 82T13x5 ET28 4x10832TiresRims
185/60 R14 82T14x5.5 ET24 4x10832TiresRims
185/55 R15 81H15x6 ET20 4x10833TiresRims
195/50 R15 81H15x6.5 ET20 4x10835TiresRims
205/45 R16 81V16x7 ET15 4x10835TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.