Skip to content

2020 Dacia Sandero Stepway tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Dacia Sandero Stepway.

2020 Dacia Sandero Stepway tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Dacia Sandero Stepway II (B52) Facelift

2017 – 2023 Europe market 3 trims

Sandero Stepway 0.9 TCe

89 hp · 0.9L H4Bt I3 205/55 R16 91H 4 fitments
GenerationII (B52) Facelift 2017–2023
Power89 hp
Engine0.9L H4Bt I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91H16x6 ET37 4x1002.1TiresRims
185/65 R15 88T15x6 ET40 4x1002.1TiresRims
195/55 R16 87H16x6 ET37 4x1002.1TiresRims
205/55 R16 91H16x6.5 ET35 4x1002.1TiresRims

Sandero Stepway 1.0 SCe

72 hp · 1.0L B4D I3 205/55 R16 91H 4 fitments
GenerationII (B52) Facelift 2017–2023
Power72 hp
Engine1.0L B4D I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91H16x6 ET37 4x1002.1TiresRims
185/65 R15 88T15x6 ET40 4x1002.1TiresRims
195/55 R16 87H16x6 ET37 4x1002.1TiresRims
205/55 R16 91H16x6.5 ET35 4x1002.1TiresRims

Sandero Stepway 1.5 dCi

94 hp · 1.5L K9K I4 205/55 R16 91H 4 fitments
GenerationII (B52) Facelift 2017–2023
Power94 hp
Engine1.5L K9K I4, Diesel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91H16x6 ET37 4x1002.1TiresRims
185/65 R15 88T15x6 ET40 4x1002.1TiresRims
195/55 R16 87H16x6 ET37 4x1002.1TiresRims
205/55 R16 91H16x6.5 ET35 4x1002.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.