1997 Daewoo Chairman tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Daewoo Chairman.

1997 Daewoo Chairman tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 2001 South Korea market 1 trim

217 hp · V6 205/55 R16 92H 7 fitments

GenerationH 1997–2001

Power217 hp

EngineV6, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16 92H	16x6.5 ET50 ~~5x112~~	32	Tires Rims
225/50 R16 92V	16x7 ET51 ~~5x112~~	32	Tires Rims
205/50 R17 91H	17x6.5 ET50 ~~5x112~~	32	Tires Rims
225/45 R17 91V	17x7.5 ET56 ~~5x112~~	35	Tires Rims
205/45 R18 89V	18x7 ET51 ~~5x112~~	35	Tires Rims
225/40 R18 91V	18x7.5 ET54 ~~5x112~~	35	Tires Rims
245/35 ZR18 89Z	18x8 ET50 ~~5x112~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.