Skip to content

2005 Daewoo Lacetti tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Daewoo Lacetti.

Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Daewoo Lacetti J200

2002 – 2008 South Korea market 3 trims

Lacetti 1.4i

94 hp · I4 175/70 R14 90S 6 fitments
GenerationJ200 2002–2008
Power94 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 90S14x5.5 ET44 4x114.328TiresRims
185/65 R14 89T14x5.5 ET44 4x114.329TiresRims
175/65 R15 88T15x5.5 ET44 4x114.329TiresRims
185/60 R15 89T15x5.5 ET44 4x114.329TiresRims
185/55 R16 87H16x6 ET45 4x114.330TiresRims
195/45 R17 87V17x6.5 ET42 4x114.333TiresRims

Lacetti 1.6i

103 hp · I4 175/70 R14 90S 6 fitments
GenerationJ200 2002–2008
Power103 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 90S14x5.5 ET44 4x114.328TiresRims
185/65 R14 89T14x5.5 ET44 4x114.329TiresRims
195/65 R14 89T14x6 ET45 4x114.329TiresRims
195/55 R15 89H15x6 ET45 4x114.330TiresRims
195/50 R16 88H16x6.5 ET42 4x114.330TiresRims
205/40 R17 87V17x7 ET40 4x114.333TiresRims

Lacetti 1.8i

118 hp · I4 185/65 R14 89T 6 fitments
GenerationJ200 2002–2008
Power118 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 89T14x5.5 ET44 4x114.329TiresRims
195/55 R15 89H15x6 ET44 4x114.330TiresRims
205/55 R15 89H15x6.5 ET42 4x114.330TiresRims
205/45 R16 88V16x6.5 ET40 4x114.330TiresRims
205/40 R17 87V17x7 ET40 4x114.333TiresRims
215/40 R17 89V17x7 ET40 4x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.