Skip to content

2002 Daewoo Leganza tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Daewoo Leganza.

Fitment tables

2 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Daewoo Leganza V100

1997 – 2002 South Korea market 2 trims

Leganza 2.0i

128 hp · I4 205/60 R15 92T 5 fitments
GenerationV100 1997–2002
Power128 hp
EngineI4, Petrol
Center bore56.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 92T15x6 ET49 5x114.329TiresRims
205/55 R16 91H16x6.5 ET45 5x114.330TiresRims
215/50 R16 90H16x6.5 ET45 5x114.330TiresRims
215/45 R17 91V17x7 ET45 5x114.333TiresRims
235/35 ZR18 89Z18x8 ET38 5x114.336TiresRims

Leganza 2.2i

133 hp · 2.2L I4 205/60 R15 92T 5 fitments
GenerationV100 1997–2002
Power133 hp
Engine2.2L I4, Petrol
Center bore56.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 92T15x6 ET49 5x114.329TiresRims
205/55 R16 91H16x6.5 ET45 5x114.330TiresRims
225/50 R16 91H16x7 ET42 5x114.330TiresRims
225/45 R17 91V17x7.5 ET40 5x114.333TiresRims
245/35 ZR18 91Z18x8 ET35 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.