Skip to content

1987 Daewoo Racer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Daewoo Racer.

Fitment tables

1 trim sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Daewoo Racer GM T

1986 – 1995 South Korea market 1 trim

Racer 2.0

N/A · I4 185/65 R14 90S 8 fitments
GenerationGM T 1986–1995
PowerN/A
EngineI4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 90S14x5.5 ET49 4x10030TiresRims
205/60 R14 89T14x6 ET45 4x10032TiresRims
185/60 R15 89T15x5.5 ET49 4x10030TiresRims
195/55 R15 87H15x6 ET45 4x10032TiresRims
205/55 R15 89H15x6.5 ET45 4x10033TiresRims
205/50 R16 89H16x6.5 ET45 4x10033TiresRims
215/45 R16 88V16x7 ET42 4x10033TiresRims
215/40 R17 87V17x7 ET42 4x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.