Skip to content

2003 Daewoo Statesman tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Daewoo Statesman.

Fitment tables

2 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Daewoo Statesman WK\WL

2003 – 2006 South Korea market 2 trims

Statesman 3.8i

247 hp · 3.8L V6 235/55 R17 101V 5 fitments
GenerationWK\WL 2003–2006
Power247 hp
Engine3.8L V6, Petrol
Center bore70.5 mm
PCD5x120.65
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 101V17x7.5 ET38 5x120.6535TiresRims
235/50 R18 101V18x7.5 ET38 5x120.6535TiresRims
235/45 ZR19 99W19x8 ET38 5x120.6536TiresRims
255/40 ZR19 101Y19x8.5 ET35 5x120.6538TiresRims
255/35 ZR20 99Y20x8.5 ET35 5x120.6539TiresRims

Statesman 5.7i

325 hp · 5.7L V8 235/55 R17 101V 5 fitments
GenerationWK\WL 2003–2006
Power325 hp
Engine5.7L V8, Petrol
Center bore70.5 mm
PCD5x120.65
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 101V17x7.5 ET38 5x120.6535TiresRims
255/50 R17 101V17x8 ET35 5x120.6536TiresRims
255/45 ZR18 101W18x8.5 ET35 5x120.6538TiresRims
255/40 ZR19 101W19x8.5 ET35 5x120.6538TiresRims
265/35 ZR20 101Y20x9 ET30 5x120.6541TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.