Skip to content

2009 Daewoo Veritas tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Daewoo Veritas.

Fitment tables

2 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Daewoo Veritas WM

2008 – 2010 South Korea market 2 trims

Veritas 3.6i

276 hp · 3.6L V6 245/35 ZR20 101Y / 285/30 ZR20 103Y 4 fitments
GenerationWM 2008–2010
Power276 hp
Engine3.6L V6, Petrol
Center bore70.5 mm
PCD5x120.65
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR20 101Y20x8.5 ET30 5x120.6536TiresRims
Rear285/30 ZR20 103Y20x10 ET30 5x120.6536TiresRims
245/45 R18 101V18x8 ET38 5x120.6536TiresRims
245/40 R19 101V19x8 ET38 5x120.6536TiresRims
245/35 ZR20 99W20x8 ET35 5x120.6539TiresRims

Veritas 6.0i

345 hp · 6.0L V8 265/35 ZR20 103Y / 305/30 ZR20 105Y 4 fitments
GenerationWM 2008–2010
Power345 hp
Engine6.0L V8, Petrol
Center bore70.5 mm
PCD5x120.65
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front265/35 ZR20 103Y20x9 ET30 5x120.6536TiresRims
Rear305/30 ZR20 105Y20x11 ET30 5x120.6536TiresRims
245/45 ZR18 101W18x8 ET38 5x120.6536TiresRims
245/40 ZR19 101W19x8 ET38 5x120.6536TiresRims
255/35 ZR20 99Y20x8.5 ET35 5x120.6538TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.