Skip to content

2006 Daihatsu Charade tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Daihatsu Charade.

2006 Daihatsu Charade tire sizes

Bolt pattern

2 generations were sold in 2006. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Daihatsu Charade L275

2006 – 2010 Europe market 2 trims

Charade 0.66i

58 hp · I3 145/80 R13 75S 3 fitments
GenerationL275 2006–2010
MarketEurope
Power58 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 75S13x4 ET50 4x10026TiresRims
155/65 R13 75S13x4.5 ET45 4x10026TiresRims
165/55 R14 74T14x5 ET45 4x10029TiresRims

Charade 1.0i

70 hp · I3 155/65 R13 75S 3 fitments
GenerationL275 2006–2010
MarketEurope
Power70 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R13 75S13x4.5 ET45 4x10026TiresRims
165/55 R14 74T14x5 ET45 4x10029TiresRims
165/50 R15 72V15x5 ET45 4x10029TiresRims

Daihatsu Charade L250

2002 – 2009 Europe market 1 trim

Charade 1.0i

55 hp · 1.0L I3 155/65 R13 75S 3 fitments
GenerationL250 2002–2009
MarketMiddle East
Power55 hp
Engine1.0L I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R13 75S13x4.5 ET45 4x10026TiresRims
165/55 R14 74T14x5 ET45 4x10029TiresRims
165/50 R15 72V15x5 ET45 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.