2009 Daihatsu Dario Terios tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Daihatsu Dario Terios.

2009 Daihatsu Dario Terios tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2009 1 trim

84 hp · 1.3 L K3-VE I4 Petrol 1.3 L K3-VE I4 205/70 R15 4 fitments

GenerationJ100 2003–2009

MarketChina

Power84 hp

Engine1.3 L K3-VE I4 Petrol 1.3 L K3-VE I4, Petrol

Center bore66.6 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	205/70 R15	15x5.5 ET35 ~~5x114.3~~	26	Tires Rims
Alt	175/80 R15	15x5 ET35 ~~5x114.3~~	26	Tires Rims
Alt	205/65 R16	16x5.5 ET35 ~~5x114.3~~	29	Tires Rims
Alt	205/65 R16	16x6 ET35 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.