2001 Daihatsu Delta Wagon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Daihatsu Delta Wagon.

2001 Daihatsu Delta Wagon tire sizes

195/65R15 205/65R15

Bolt patterns

4x114.3

Delta Wagon

5x114.3

Delta Wagon

Other years

1996 1997 1998 1999 2000 2001 All 1996–2001

Fitment tables

4 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Daihatsu Delta Wagon Delta Wagon

1996 – 2001 4 trims

Delta Wagon 2.0i (GF-SR40N)

129 hp · 3S-FE I4 195/65 R15 91S 1 fitment

GenerationDelta Wagon 1996–2001

Power129 hp

Engine3S-FE I4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET27 ~~4x114.3~~	32	Tires Rims

Delta Wagon 2.0i (GF-SR50N)

129 hp · 3S-FE I4 205/65 R15 94S 1 fitment

GenerationDelta Wagon 1996–2001

Power129 hp

Engine3S-FE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94S	15x6 ET45 ~~5x114.3~~	32	Tires Rims

Delta Wagon 2.2DT (KH-CR40N)

93 hp · 3C-TE I4 195/65 R15 91S 1 fitment

GenerationDelta Wagon 1996–2001

Power93 hp

Engine3C-TE I4, Diesel

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET27 ~~4x114.3~~	32	Tires Rims

Delta Wagon 2.2DT (KH-CR50N)

93 hp · 3C-TE I4 205/65 R15 94S 1 fitment

GenerationDelta Wagon 1996–2001

Power93 hp

Engine3C-TE I4, Diesel

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94S	15x6 ET45 ~~5x114.3~~	32	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.