2012 Daihatsu Materia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Daihatsu Materia.

2012 Daihatsu Materia tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2012 Europe market 2 trims

90 hp · I4 175/65 R14 84S 4 fitments

GenerationM400 2006–2012

Power90 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 84S	14x5 ET40 ~~4x100~~	32	Tires Rims
185/60 R14 84S	14x5.5 ET42 ~~4x100~~	32	Tires Rims
185/55 R15 82T	15x6 ET45 ~~4x100~~	32	Tires Rims
195/45 R16 82T	16x6.5 ET42 ~~4x100~~	30	Tires Rims

108 hp · I4 185/55 R15 84S 4 fitments

GenerationM400 2006–2012

Power108 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/55 R15 84S	15x6 ET45 ~~4x100~~	32	Tires Rims
195/50 R15 82T	15x6 ET45 ~~4x100~~	30	Tires Rims
205/45 R16 81V	16x6.5 ET42 ~~4x100~~	30	Tires Rims
205/40 R17 81V	17x7 ET40 ~~4x100~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.