2007 Daihatsu Mira Custom tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Daihatsu Mira Custom.

2007 Daihatsu Mira Custom tire sizes

145/80R13 155/65R14 165/55R15

Bolt pattern

4x100

Other years

2006 2007 2008 2009 2010 2011 2012 2013 All 2006–2013

Fitment tables

4 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Daihatsu Mira Custom Mira Custom

2006 – 2013 4 trims

Mira Custom 0.66i (CBA-L275S)

63 hp · I3 165/55 R15 75V 1 fitment

GenerationMira Custom 2006–2013

Power63 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	–	Tires Rims

Mira Custom 0.66i (CBA-L285S)

63 hp · I3 165/55 R15 75V 1 fitment

GenerationMira Custom 2006–2013

Power63 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/55 R15 75V	15x4.5 ET45 ~~4x100~~	–	Tires Rims

Mira Custom 0.66i (DBA-L275S)

58 hp · I3 145/80 R13 75S 2 fitments

GenerationMira Custom 2006–2013

Power58 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 75S	13x4 ET40 ~~4x100~~	–	Tires Rims
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	–	Tires Rims

Mira Custom 0.66i (DBA-L285S)

58 hp · I3 145/80 R13 75S 2 fitments

GenerationMira Custom 2006–2013

Power58 hp

EngineI3, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 75S	13x4 ET40 ~~4x100~~	–	Tires Rims
155/65 R14 75S	14x4.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.