1986 Daihatsu Mira tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Daihatsu Mira.

1986 Daihatsu Mira tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1985 – 1989 Japan market 2 trims

32 hp · I3 135x R12 3 fitments

GenerationL70 1985–1989

Power32 hp

EngineI3, Petrol

Center bore66.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R12	12x4 ET35 ~~4x110~~	25	Tires Rims
145/80 R12	12x4 ET50 ~~4x110~~	26	Tires Rims
155/70 R13	13x4.5 ET45 ~~4x110~~	26	Tires Rims

49 hp · I3 145/80 R12 3 fitments

GenerationL70 1985–1989

Power49 hp

EngineI3, Petrol

Center bore66.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R12	12x4 ET50 ~~4x110~~	26	Tires Rims
155/65 R13	13x4.5 ET45 ~~4x110~~	26	Tires Rims
165/55 R14	14x5 ET40 ~~4x110~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.