Skip to content

2011 Daihatsu Move Conte tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Daihatsu Move Conte.

2011 Daihatsu Move Conte tire sizes

Bolt pattern

2 generations were sold in 2011. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Daihatsu Move Conte Facelift

2011 – 2017 Japan market 2 trims

Move Conte 0.66i (DBA-L575S)

51 hp · I3 155/65 R14 75S 2 fitments
GenerationFacelift 2011–2017
Power51 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75S14x4.5 ET45 4x10026TiresRims
145/80 R13 75S13x4 ET40 4x10026TiresRims

Move Conte 0.66i (DBA-L585S)

51 hp · I3 155/65 R14 75S 2 fitments
GenerationFacelift 2011–2017
Power51 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75S14x4.5 ET45 4x10026TiresRims
145/80 R13 75S13x4 ET40 4x10026TiresRims

Daihatsu Move Conte Move Conte

2008 – 2011 Japan market 2 trims

Move Conte 0.66i (DBA-L575S)

58 hp · I3 145/80 R13 75S 2 fitments
GenerationMove Conte 2008–2011
Power58 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 75S13x4 ET40 4x100TiresRims
155/65 R14 75S14x4.5 ET45 4x10026TiresRims

Move Conte 0.66i (DBA-L585S)

58 hp · I3 145/80 R13 75S 2 fitments
GenerationMove Conte 2008–2011
Power58 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 75S13x4 ET40 4x100TiresRims
155/65 R14 75S14x4.5 ET45 4x10026TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.