2000 Daihatsu Opti tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Daihatsu Opti.

2000 Daihatsu Opti tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2002 Japan market 1 trim

51 hp · I3 145/70 R12 72S 4 fitments

GenerationL500 1999–2002

Power51 hp

EngineI3, Petrol

Center bore66.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/70 R12 72S	12x4 ET35 ~~4x110~~	26	Tires Rims
155/65 R13 72S	13x4.5 ET45 ~~4x110~~	26	Tires Rims
165/55 R14 72V	14x5 ET40 ~~4x110~~	29	Tires Rims
165/50 R15 72V	15x5 ET40 ~~4x110~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.