1986 Daihatsu Rugger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Daihatsu Rugger.

1986 Daihatsu Rugger tire sizes

255/65R16 265/60R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 1991 Japan market 1 trim

93 hp · I4 255x R15 106S 3 fitments

GenerationF70/75/77 1984–1991

Power93 hp

EngineI4, Diesel

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255x R15 106S	15x7.5 ET5 ~~5x139.7~~	2.2	Tires Rims
255/65 R16 106S	16x7.5 ET5 ~~5x139.7~~	2.2	Tires Rims
265/60 R17 104T	17x8 ET0 ~~5x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.