1993 Daihatsu Rugger tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Daihatsu Rugger.

1993 Daihatsu Rugger tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 2002 Japan market 2 trims

90 hp · I4 215x R15 108Q 4 fitments

GenerationF78 1992–2002

Power90 hp

EngineI4, Petrol

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215x R15 108Q	15x6 ET19 ~~5x139.7~~	2.3	Tires Rims
225/80 R15 108Q	15x6.5 ET15 ~~5x139.7~~	2.3	Tires Rims
235/75 R16 108Q	16x7 ET10 ~~5x139.7~~	2.3	Tires Rims
245/65 R17 106S	17x7.5 ET5 ~~5x139.7~~	2.2	Tires Rims

101 hp · I4 215x R15 108Q 4 fitments

GenerationF78 1992–2002

Power101 hp

EngineI4, Diesel

Center bore108.1 mm

PCD5x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215x R15 108Q	15x6 ET19 ~~5x139.7~~	2.3	Tires Rims
255/70 R15 106S	15x7.5 ET5 ~~5x139.7~~	2.2	Tires Rims
255/65 R16 106S	16x7.5 ET5 ~~5x139.7~~	2.2	Tires Rims
265/60 R17 104T	17x8 ET0 ~~5x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.