Skip to content

2013 Daihatsu Tanto Custom tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Daihatsu Tanto Custom.

2013 Daihatsu Tanto Custom tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Daihatsu Tanto Custom III

2013 – 2015 Japan market 4 trims

Tanto Custom 0.66i (DBA-LA600S)

51 hp · I3 155/65 R14 75S 4 fitments
GenerationIII 2013–2015
Power51 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75S14x4.5 ET45 4x10035TiresRims
165/60 R14 75S14x4.5 ET45 4x10035TiresRims
165/55 R15 75V15x4.5 ET45 4x10035TiresRims
165/55 R15 75V15x5 ET40 4x10035TiresRims

Tanto Custom 0.66i (DBA-LA610S)

51 hp · I3 155/65 R14 75S 4 fitments
GenerationIII 2013–2015
Power51 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75S14x4.5 ET45 4x10035TiresRims
165/60 R14 75S14x4.5 ET45 4x10035TiresRims
165/55 R15 75V15x4.5 ET45 4x10035TiresRims
165/55 R15 75V15x5 ET40 4x10035TiresRims

Tanto Custom 0.66i Turbo (DBA-LA600S)

63 hp · I3 165/55 R15 75V 2 fitments
GenerationIII 2013–2015
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/55 R15 75V15x5 ET40 4x10035TiresRims
195/40 R16 75V16x6.5 ET35 4x10035TiresRims

Tanto Custom 0.66i Turbo (DBA-LA610S)

63 hp · I3 165/55 R15 75V 2 fitments
GenerationIII 2013–2015
Power63 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/55 R15 75V15x5 ET40 4x10035TiresRims
195/40 R16 75V16x6.5 ET35 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.