2008 Daihatsu Xenia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Daihatsu Xenia.

2008 Daihatsu Xenia tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2010 Southeast Asia market 2 trims

62 hp · I3 165/70 R13 79S 4 fitments

GenerationF600 2003–2010

Power62 hp

EngineI3, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13 79S	13x4.5 ET45 ~~4x114.3~~	33	Tires Rims
175/65 R13 79T	13x5 ET40 ~~4x114.3~~	33	Tires Rims
165/65 R14 79T	14x5 ET40 ~~4x114.3~~	33	Tires Rims
175/60 R14 79T	14x5.5 ET40 ~~4x114.3~~	33	Tires Rims

88 hp · I4 175/65 R13 79T 4 fitments

GenerationF600 2003–2010

Power88 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R13 79T	13x5 ET40 ~~4x114.3~~	33	Tires Rims
165/65 R14 79T	14x5 ET40 ~~4x114.3~~	33	Tires Rims
175/60 R14 79T	14x5.5 ET40 ~~4x114.3~~	33	Tires Rims
175/55 R15 77T	15x5.5 ET40 ~~4x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.