Skip to content

2019 Datsun on-DO tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Datsun on-DO.

2019 Datsun on-DO tire sizes

Bolt pattern

2 generations were sold in 2019. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Datsun on-DO Facelift

2019 – 2021 2 trims

on-DO 1.6i

105 hp · 1.6L VAZ-21127 I4 185/60 R14 2 fitments
GenerationFacelift 2019–2021
Power105 hp
Engine1.6L VAZ-21127 I4, Petrol
Center bore58.5 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x5.5 ET35 4x98–TiresRims
185/55 R1515x6 ET35 4x98–TiresRims

on-DO 1.6i

86 hp · 1.6L VAZ-11186 I4 185/60 R14 2 fitments
GenerationFacelift 2019–2021
Power86 hp
Engine1.6L VAZ-11186 I4, Petrol
Center bore58.5 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x5.5 ET35 4x98–TiresRims
185/55 R1515x6 ET35 4x98–TiresRims

Datsun on-DO on-DO

2014 – 2019 2 trims

on-DO 1.6i

86 hp · 1.6L VAZ-11186 I4 185/60 R14 2 fitments
Generationon-DO 2014–2019
Power86 hp
Engine1.6L VAZ-11186 I4, Petrol
Center bore58.5 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x5.5 ET35 4x98–TiresRims
185/55 R1515x6 ET35 4x98–TiresRims

on-DO 1.6i

105 hp · 1.6L VAZ-21127 I4 185/60 R14 2 fitments
Generationon-DO 2014–2019
Power105 hp
Engine1.6L VAZ-21127 I4, Petrol
Center bore58.5 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1414x5.5 ET35 4x98–TiresRims
185/55 R1515x6 ET35 4x98–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.